FEATURES                     PDF

Specific waterproofing product, highly water repellent, for numerous types of natural stones: peperino, tuff, pietra serena, carparo, pietra leccese, etc.

It forms a thin film that penetrates inside the pores and confers resistance against mechanical wear, stopping the chalking phenomenon and consequent formation of dust. It proofs the treated surfaces against water and oil and once dried, it creates a “wet” effect that doesn’t yellow in time and confers resistance against chemical products, lubricating oils and numerous solvents like naphtha and gas oil.

FEATURES                  PDF

Clear impregnating product that penetrates the structure of components, creating a layer underneath that prevents water penetration. The product does not alter the support’s breathability, thus remaining permeable to air despite repelling water in its liquid state. Since humidity cannot get through, the plaster or paint remain applied to the wall without crumbling. ARAM IDROSTOP doesn't alter the stones or colour of the base; it creates a barrier against “acid rain”, it reduces efflorescences and penetration of saline solutions in sea environments. The surfaces are cleaner since rain washes away dirt more easily compared to non-treated surfaces that absorb both rain and dirt. 

FEATURES        PDF

ARAM IMO is a chemical compound able to react with the porous structure of rust and transform it into an inert, dark colored compound.
The product adheres perfectly to any ferrous metal and the film that forms acts as a protective barrier against the corrosive action of moisture and the polluted atmosphere.

FEATURES              PDF

It is a strip paint made with vinyl copolymers that confer slight surface adherence, elasticity and resistance to tear. It protects shiny, ground, or anyhow worked metal surfaces (guides, flanges, bases, etc.) during transport. It is suitable to protect walls in painting booths, of both water and dry type. ARAM STRIP is ideal for: joiners, painters, metal and mechanical, nautical, aeronautical industries, transport companies and for exhibitive stands. The product is available in three versions:

• Clear colourless

FEATURES             PDF

Strip paint made with water-soluble resins held in a water medium, blended with plasticizing and releasing agents. The formula allows obtaining a plastic film that adheres on a wide range of industrial surfaces without gluing, like: metals, paints, plastic, glass, smooth leather, etc. Polymerization takes place through water evaporation, within a timeframe depending on the thickness of the applied layer, ambient temperature and use of forced ventilation. The layer that forms can be easily stripped off, it remains flexible for a long time, resistant to humidity, alkaline and acid agents and cyclical temperature changes. No residue is left on the finished surface. The product comes in clear and white coating versions. The white coating version is water resistant for approx. 3 hours. 

FEATURES                          PDF

Mineral building materials absorb a different percentage of humidity when they come into contact with water, based on their degree of porosity. The following damages may occur in buildings with non-protected facades, due to humidity:

• Humidity infiltration in the walls
• Damages caused by frost

FEATURES         PDF

Specific product with 'blocking effect' able to capture and hold on the ground the over-spray formed during the painting operations.
Its use therefore allows to remove from the environment the particles of paint and dust that can be deposited on the surfaces of the pieces in painting, which create the undesired 'anticoating' effect.
The particles captured on the ground remain, due to the electrostatic effect, stable and are not reclaimed for the walk of personnel, for the use of spray guns or by pressurization.

FEATURES                         PDF

Forkal Plus carries out a double function: in addition to be a sequestering agent, it boasts remarkable suspension properties. 

Forkal Plus is anti-corrosive, protecting the surfaces from chemically aggressive waters.  No scales are formed by adding Forkal Plus to water, also of significant hardness; in most case, limescale turns into inert flocculated sludge that does not stick to the surfaces. This flocculated sludge is easily removed through purging operations.

FEATURES                         PDF

Forkal Tower is a formula that prevents the formation of limescale in cooling circuits.

This result can be achieved thanks to the high sequestering, anti-nucleant and dispersing properties of Forkal Tower with regards to fouling salts, in particular those containing Calcium, Magnesium, Iron, Copper and Aluminium.

Forkal Tower is used to treat water in open cooling circuits with running and recirculating water.

FEATURES           PDF

Kemphos P is a phosphodegreaser for pre paint treatments of steel, aluminium, zinc, copper and his alloys.

Kemphos P is a liquid product with a quickly solubility in water.

The dosage of the product is possible with manual method or with automatic dosing equipments.

In Kemphos P there are particulary raw materials that in one step remove soil and produce a strong thin layer of amorphous iron phosphate, the medium weight of this layer is 0,5-0,8 gr/m².

FEATURES                       PDF

Kemphos S2 is a phosphodegreaser for prepaint treatments of steel, aluminium, zinc, copper and his alloys.

Kemphos S2 is a liquid product with a quickly solubility in water.

The dosage of the product is possible with manual method or with automatic dosing equipments.

In Kemphos S2 there are particulary raw materials that in one step remove soil and produce a strong thin layer of amorphous iron phosphate.

This amorphous layer improves corrosion resistance and provides a valid support to following painting.

FEATURES           PDF 

Product born from the need to protect natural materials such as stones of different types and nature (trachyte, sandstone, tuff, marble) but also bricks, industrial floors in cement, plasters and gypsum from wear and deterioration induced by time and from exposure and adverse physical chemical agents such as urban and industrial atmospheres, acid rains, bird dejections, the effects of freeze / thaw cycles, etc.

INTRODUCTION          PDF

The terracotta from antiquity to today has always had a great variety of uses, thanks to its resistance and the fact that it can be considered a "living" material that breathes. At present, it is experiencing a second youth, above all as a flooring material: it can safely be said that most of the new buildings and renovations at least part of the terracotta flooring. And it is precisely one of its most valuable features, namely the fact that it is a porous and breathing material, which creates the biggest drawbacks to those who want to enjoy its beauty and warmth.

FEATURES              PDF 

KEMPRO FILM is a monocomponent enamel based on acrylic resins, to be used as a finishing paint product.
The product is easy to use and, without requiring the laborious preparation of the bicomponents, has excellent resistance to corrosive agents and, in some cases, can also be used without the prior application of a primer.

FEATURES             PDF

Fast drying primer based on activated zinc phosphate, modified alkyl resin with phenolic resin, specific as a primer for painting iron, steel and aluminum alloys, both for interiors and exteriors.
- Dries quickly. The painted piece can be manipulated after just 10 minutes and it is completely dried after 90-120 minutes.
- Maximum adhesion of the film to the support.
- Economic. With a thickness of 50 microns, 9 sqm / lt are obtained.

FEATURES              PDF

Spray product based on metal micropowders linked by silicone resin.

The product is able to give corrosion resistance and protection against chemical and atmospheric agents.
KEMPRO GOLD gives the treated pieces an appearance similar to galvanic gilding.

• It forms a coating that resists scratches and impacts and is stable up to high temperatures.
• It dries quickly and forms a glossy and shiny layer.
• Ideal for protecting and retouching gilded details, antique frames, pottery and various ornamental objects.

FEATURES            PDF

Permanent, flexible and highly hard and brilliant protective coating, resistant to atmospheric and environmental conditions (UV radiation, industrial atmospheres, salt, etc.) and scratch.

KEMPRO LAB is an innovative product that is compatible with various types of materials such as paints (polyester, polyurethane, epoxy, epoxypolyester, alkyd, acrylic, etc.), Glass, Metals, some Plastic materials, Smooth and Non-Porous Stones.

This broadens the application possibilities.

FEATURES               PDF

KEMPRO LAC is a monocomponent paint based on acrylic resins, to be used as a transparent protective finish for metals.
There are several characteristics that make it an interesting product:

It can be applied directly on the surfaces, provided they are free from rust, grease and old paints, without it being necessary to prepare them with specific treatments or adhesives: it constitutes a complete painting cycle by itself.

FEATURES           PDF

Spray product based on aluminum, steel and chromium micropowders bonded by silicone resin.
The product is able to give corrosion resistance and protection against chemical and atmospheric agents.

• It forms a coating that resists scratches and impacts and is stable up to high temperatures.
• It dries quickly and forms a glossy and shiny layer.
• Ideal for protecting and retouching mufflers, visible weldings and various structures in chromed steel

FEATURES       PDF

Quick dry anti-rust product containing zinc phosphate and alkyd resin. KEMPRO RAPID can be used as protective and anti-corrosive coat for indoors and outdoors.

• Quick drying. The painted part can be handled just after 10 minutes from the application, and the product completely dries in just three hours.
• Extreme adherence of the film to the support. If applied on clean and dry surfaces, it perfectly and permanently anchors to them. 
• Cost effectiveness. 5 square metres of surface can be coated with a kilogram of product, with a thickness of 50 micron. For lower, more common thicknesses, 7-8 square metres can be coated with one kilogram of paint. 

FEATURES                   PDF

Product in spray bottle containing aluminium and steel micro-powders bond by silicone resin. The product confers resistance against corrosion and protection against chemical and atmospheric agents.

• It forms a finish resistant against scratches and shocks, and confers stability up to a temperature of +500ºC
• It dries quickly and forms a shiny and bright layer that can be coated
• Ideal to protect mufflers, rims of vehicles, exposed welding and various structures in stainless steel.
• Recommended for pipes, tanks, sea structures.

FEATURES         PDF

KEMPRO STONE is a one-component water-repellent based on acrylic resins, to be used as a transparent protective agent for marble, natural stone, pebbles, porphyry etc.
It can be applied directly on the surfaces, provided they are free from rust, dirt, old varnishes and humidity without it being necessary to prepare them with specific treatments or adhesives: it constitutes a complete painting cycle by itself.
Thanks to its basic components, it forms a particularly compact and continuous film that resists corrosive environments and that is still very good on surfaces without altering the color but providing a "wet" effect. It is the ideal coating for marble, natural stone, porphyry and in general for those structures that must be outdoors or in particularly aggressive environments.

FEATURES               PDF 

The painting of galvanized metal has always been an operation to be carried out with specialized products and paying considerable attention to the execution of the work.
A specific anti-rust primer is required, of good quality and on very recent galvanizing and therefore still "glossy" it may be necessary to roughen the surface with a chemical or mechanical action.

FEATURES            PDF

Finish featuring a high content of zinc, that protects iron, steel and aluminium surfaces against rust and corrosion. KEMPRO ZINCO leaves a protective layer with a high percentage of metallic zinc on the treated surface, able to confer a level of protection equal to galvanic zinc coating, but without the inconveniences and high costs of the latter. The micro-particles of pure zinc firmly anchor to the iron and steel and the surface layer of zinc oxide that forms, prevents corrosion and rust. The finish that is formed with the treatment, is extremity flexible and allows bending the material without peeling off and cracking. The surface treated with KEMPRO ZINCO can be easily welded and is an excellent primer for paints:

• It anchors to the metal more firmly than any anti-rust product.
• It forms an extremely protective and safe finish which is very stable also at high temperatures.
• It forms a film with surface suitable for anchoring the finish paint coat.

FEATURES           PDF

LIGHT WAX is a special wax, based on pure beeswax, of low hardness, ideal for the treatment of shiny or rough surfaces of furniture.

The microdispersion of the waxing particles allows to obtain, quickly and in a single step, the following effects:

• polishing
• restructuring

On the raw wood coming from a restoration, thanks to the presence of a solvent, it is able to penetrate even deeply, thus increasing the water-repellent characteristics.

LIGHT WAX is suitable for: restorers, furniture makers, as well as museums, churches, trade fairs, offices, meeting rooms, hotels, institutions, communities and for your home.

FEATURES           PDF

The METAL-BLACK, composed of two products (A and B) is a cold chemical burner, active on ferrous metals, with the characteristic of performing the browning action in two distinct and distinct following times, allowing to achieve several advantages:

• Employing the only METAL BLACK A is possible to obtain a chemical copper plating, extremely compact and adherent to the substrate, with a thickness of about 0.15 microns. This property can be used to ennoble ferrous materials.
• By using the METAL-BLACK B, after the product A the burnishing is obtained.
• By using only METAL-BLACK B on copper and their alloys it is possible to give aging effects to the manufactured articles.

It is ideal for the treatment of cutting tools, reamers, files, drill bits, screws and bolts, gears and metal tools.

FEATURES         PDF

METAL- BLACK HT, is a chemical hot burnishing which produces the superficial conversion of ferrous alloys, through the formation of black iron oxide. Following an appropriate subsequent sealing process, it guarantees an average protection against exposure to medium/low environmental corrosion rate: such conversion layer gives a higher protection and adhesion than cold burnishing processes. In addition to protective qualities, METAL- BLACK HT provide functional and visual properties on treated parts, whose surface, assumes a black colour, according to the type of ferrous alloy, the finished surface grade of the part (polished or opaque) and time and temperature of the treatment cycle (Tab.1). Main advantages are:

FEATURES                      PDF

METALDEC BLACK is a cold chemical burnisher, active on ferrous metals like cast iron and steel. It carries out its action within 1 and 2 minutes according to the type of treatment, forming an even black finishing boasting good resistance against corrosion.  It does not alter the geometry and sizes of the treated object. It is ideal for treating cutting tools, reamers, files, drills, screws, bolts, gears and metal tools. This type of burnishing is safer for operators compared to hot burnishing, since no harmful and corrosive vapours are formed. 

FEATURES                       PDF

METALDEC INOX P is used to favour the formation of the layer of passivation of 300 series stainess steel. In fact thanks to this thin and invisible layer that steel has some characteristics of chemical inertness when it called to br used in many types of industrial environments, urban, ect.. METALDEC INOX P develops on the manufactctures articles in treatment timing not exceed 60 minutes a new passivation layer. The pieces with this treatment are ready to be used in the best conditions of chemical resistence. 

FEATURES       PDF

PRONEX DRY contains a transparent acrylic resin and forms a dry, glossy, transparent and extremely thin film.
The product forms a coating without solution of continuity,, elastic and transparent coating that adheres to all metals, wood and paper.
The film that forms, although very thin and almost invisible, protects against wear, oxidation and handling and is resistant to the attack of most alkalis, acids and common industrial chemicals.

FEATURES               PDF

Protective water-repellent, specific for equipment, panels, motors and electrical systems.
The product contains solvents with degreasing, water-repellent and lubricating silicones.

DEGREASING. The product eliminates traces of fat and grease from the electrical panels that could be present when the work environment is particularly polluted.

FEATURES           PDF

Antioxidant protective oily coating for metals in production, storage and transportation.

On  clean surfaces of metal, the PRONEX OIL removes moisture, penetrates into the pores of the metal and leaves an oily transparent thin film that protects against oxidation in the presence of corrosive materials.

The PRONEX OIL remains oily, coating like a light uniform veil which does not let dirt or fingerprints adhere to metal surfaces and also provides an excellent lubricating action in case of molds.

If there is a need to remove this product, it can easily be done with any solvent or cleaning solution.

FEATURES                                 PDF

It is an anti-corrosion additive for metals which often come into contact with water and/or aqueous solutions, for extensive periods of time. The product, added to process water, thanks to its active principles contained in the formula, is able to block oxidation phenomena triggered by atmospheric oxygen and boasts excellent protective properties for ferrous metals, and also for aluminium and yellow metals.

• it is free of minerals and soaps, therefore it does not turn rancid in time
• it is over 90% biodegradable and boasts an extremely low toxicity level: any contact with the product, even pure, will not cause any issue; in case of contact, just rinse with water.
• It doesn't form any sort of films on treated parts, thus without altering the sizes or interfering with subsequent painting or plating operations. 

FEATURES              PDF

It is an anti-corrosion additive for metals that are subjected to frequent and long contact with water and / or aqueous solutions.
The product is added to the processing water and, thanks to the active ingredients present in the formulation, blocks the oxidation phenomena triggered by atmospheric oxygen and provides an excellent protective action for both ferrous metals and aluminum and yellow metals.

• It doesn’t contain mineral oils or soaps, so it doesn’t go rancid over time.
• It doesn’t form films of any kind on the treated pieces, not altering the dimensions and not interfering with subsequent painting or galvanizing operations.

FEATURES                    PDF

Protective anti-humidity, non-oily, which gives a lasting protection to any type of metal.
On clean and new surfaces, PRONEX SLIM removes condensation, penetrates the pores and leaves a transparent, thin and non-sticky film that protects against moisture and corrosive atmospheres.
On already corroded metals it penetrates deeply under the rust and leaves a protective barrier that stops any further deterioration.

FEATURES             PDF

The PRONEX WAX P is a temporary anticorrosive ready to use product that coats and protects the metal like a paint, but can easily be removed before the use of the piece treated.

The products waxy base proves to be an easy and versatile application since it can be applied directly, cancelling any phases of heating ( if environment temperature is up 25 °C) and dilution.   The physical state of fine atomization allows the product to reach in a very uniform manner complex areas due to form or arrangement.

PRONEW WAX P  forms a rather consistent layer (15-30 micron) that works as a barrier from corrosive agents, small abrasions or abrasive dust.

The product does not interact chemically with varied types of surfaces which it can be applied to, such as rubber, plastic, paints, chrome-plating’s, glass and aluminum.

APPLICATIONS                       PDF

The PRONEX WAX is a temporary anticorrosive which covers and protects the metal like a paint, but which can be easily removed before using the treated piece.
The wax-based product forms a rather thick layer (15-60 microns) which acts as a barrier which is absolutely impermeable to corrosive atmospheric agents and which also provides a not inconsiderable protection against minor impacts, scratches and abrasive dust.

The product doesn’t interact chemically with various types of surfaces on which it can be applied, such as rubber, plastic, paint, chrome, glass and aluminum.

FEATURES            PDF

PRONEX WAX SPRAY is a ready-to-use protective agent witch dries to form a thin, transparent waxy film in aerosol form.

Provides long term, indoor or outdoor corrosion protection for ferrous and no-ferrous surfaces.

Provides a film barrier which protects against corrosion, even in severe outdoor applications.

The film of  PRONEX WAX SPRAY resists at many corrosive industrial atmospheres.

FEATURES                     PDF

Special formula conceived to protect furniture, frames, sculptures, doors, windows, beams, floors and any other object in wood. The essential characteristics that distinguish PROWOOD from any other similar products available on the market, are the following:

• It is odourless and colourless
• It is non-irritating and it does not develop any harmful vapours
• It is non-corrosive on any type of metal

FEATURES                      PDF

STAIN OFF is used for the protection of natural materials installed in indoor environments, such as stones, marbles and granites, widely used to make coatings, finishes or work surfaces, such as bathroom and kitchen top, from the accidental damage resulting from accidental contact with substances of hydrophilic nature (coffee, tea, water, wine, etc.) and also lipophilic (oils, butter and fats in general).

These materials absorb, oily or aqueous substances and also the pigments for their degree of porosity. The absorption is variable according to both the type of stone, but also, for the degree of surface finish.

FEATURES                 PDF 

Chemical product consisting of additives with anti-adherent and lubricating properties. A particular formula that has been tested for many years, allows operating safely during welding procedures to prevent smearing and facilitate welding without forming air holes and flaws.

•FREE OF SILICONES. WELD does not contain silicones, therefore it is highly anti-adherent but without prejudicing the adhesion of subsequent painting coats.

•FREE OF SOLVENTS. It does not contain solvents that may be irritating for the operator and it does not release any unpleasant fumes, also in case of high temperatures used for welding on two sides or on long sections. 

FEATURES             PDF

Chemical product consisting of additives with anti-adherent and lubricating properties. A particular formula that has been tested for many years, allows operating safely during welding procedures to prevent smearing and facilitate welding without forming air holes and flaws.

• FREE OF SILICONES. WELD S does not contain silicones, therefore it is highly anti-adherent but without prejudicing the adhesion of subsequent painting coats.
• FREE OF SOLVENTS. It does not contain solvents that may be irritating for the operator and it does not release any unpleasant fumes, also in case of high temperatures used for welding on two sides or on long sections.